Archives: Supports

Rewash the dishes, check for proper loading of dishes and check to see the water temperature is no cooler than 120 degrees Fahrenheit. Use the proper amount of detergent. Always use fresh detergent.

Cloudiness that doesn’t come off with a vinegar wash is the early stages of etching on the glass. Etching is a permanent condition that cannot be reversed. It is not completely understood by the glass or automatic dishwashing industry. It appears to result from an unusual combination of factors including soft water, high heat, type…

Rinse agents improve the drying process especially in the new dishwashers with plastic (polypropylene) tubs. Rinse agents will also reduce spotting and filming. We also recommend this in hard water areas to help prevent spotting and filming. Not all items are safe to wash in the dishwasher. Check the manufacturer’s instructions first to be sure…

Rinse agents improve the drying process especially in the new dishwashers with plastic (polypropylene) tubs. Rinse agents will also reduce spotting and filming. We also recommend this in hard water areas to help prevent spotting and filming.

Check the manufacturer’s instructions. Plastic items marked “dishwasher safe” are best placed in the upper racks of your dishwasher. Preferably keep plastic items away from the heating element under the bottom rack.

Check the manufacturer’s instructions. Almost all items are marked “dishwasher safe” that can be safely washed in your dishwasher. For silverware and other utensils, never mix metals. Position items in the silverware basket so stainless, silver plate, or sterling do not touch each other. Electrolytic action between silverplate and stainless steel can cause pitting in…

If dishes are permitted to sit in the dishwasher for two or three days (to accumulate a full load), run the Rinse-Hold cycle at least once a day until the load accumulates.

Using a rinse agent will improve drying. Be sure the water temperature is correct. Run the hot water faucet closest to the dishwasher before starting your machine to ensure you have hot water at the beginning of the wash cycle.